74OL6010 5300Vrms Integrated Circuit Chip Schottky Clamped 5kV/µS CMTI 6-DIP
opto isolator ic
,ic smart card reader
74OL6010 Logic Output Optoisolator 15MBd Open Collector ,
Schottky Clamped 5300Vrms 1 Channel 5kV/µs CMTI 6-DIP
DESCRIPTION
OPTOLOGIC™ is the first family of truly logic compatible optically coupled logic interface gates.
The family consists of four device types offering LSTTL to TTL and LSTTL to CMOS interfacing.
Each of these interfacing functions is available as a buffer (A=B), or as an inverter (A=B).
The LSTTL input compatibility is provided by an input integrated circuit, with industry standard logic levels.
This input amplifier IC switches a temperature compensated current source driving a high speed 850 nm AlGaAs LED emitter.
This novel integration scheme eliminates CTR degradation over time and temperature.
The emitter is optically coupled to an integrated photodetector/high-gain, high-speed output amplifier IC.
The superior 15kV/µS common-mode noise rejection is ensured through the use of an optically transparent noise shield.
The TTL compatible output has a totem-pole with a fan-out of 10.
The CMOS compatible output has an open collector Schottkyclamped transistor that interfaces to any CMOS logic between 4.5 and 15 volts.
The 74OL6010/11 may also by used to drive power MOSFETS or transistors up to 15 volts.
The Optologic coupler family typically offers propagation of delays of 60 ns and can support 15 MBaud data communication.
The two input chips and the output chip are assembled in a 6-pin DIP high insulation voltage plastic package. Fairchild’s proprietary OPTOPLANAR ®construction provides a withstand test voltage of 5300 VRMS (1 minute).
FEATURES
• Industry first LSTTL to TTL and LSTTL to CMOS complete logic-to-logic optocoupler
• Incorporates LED drive circuitry — use as logic gate
• Very high speed • Choice of buffer or inverter
• Choice of TTL or CMOS compatible output up to 15 volts
• Fan-out of 10 TTL loads, fan-in 1 LSTTL load
• Internal noise shield — very high CMR of ±15 kV/µS
• UL recognized (File #E90700)
• Same noise immunity as LSTTL/TTL.
APPLICATIONS
• Transmission line interface — receiver and driver
• Excellent as bridged receiver in fast LAN highways
• Bus interface
• Logic family interface with ground loop noise elimination
• High speed AC/DC voltage sensing
• Driver for power semiconductor devices
• Level shifting
• Replaces fast pulse transformers
| Product Attributes | Select All |
| Categories | Isolators |
| Optoisolators - Logic Output | |
| Manufacturer | ON Semiconductor |
| Series | OPTOLOGIC™ |
| Packaging | Tube |
| Part Status | Obsolete |
| Number of Channels | 1 |
| Inputs - Side 1/Side 2 | 1/0 |
| Voltage - Isolation | 5300Vrms |
| Common Mode Transient Immunity (Min) | 5kV/µs |
| Input Type | Logic |
| Output Type | Open Collector, Schottky Clamped |
| Current - Output / Channel | 40mA |
| Data Rate | 15MBd |
| Propagation Delay tpLH / tpHL (Max) | 180ns, 120ns |
| Rise / Fall Time (Typ) | 50ns, 5ns |
| Voltage - Forward (Vf) (Typ) | - |
| Current - DC Forward (If) (Max) | - |
| Voltage - Supply | 4.5 V ~ 15 V |
| Operating Temperature | 0°C ~ 70°C |
| Mounting Type | Through Hole |
| Package / Case | 6-DIP (0.300", 7.62mm) |
MMSZ5245BT1G 500mW SOD123 Zener Voltage Regulators
SMBJ18A DO-214AA SMBJ Transzorb Transient Voltage Suppressors
BZX84C12LT1G Zener Voltage Regulators diode 225mW SOT−23 Surface Mount
MUR1620CTG Switch Mode 16A Ultrafast Power Rectifiers 100−600V
NJW0281G 50W Bipolar NPN PNP Transistors TO-3P
MOCD213M 2500Vrms SOIC8 Dual Channel Phototransistor
MJE340G Medium Power 0.5A 300V 20W NPN Silicon Transistor
MURS260T3G Power Management IC Surface Mount Ultrafast Power Rectifiers
HCPL0600R2 10bps Computer IC Chip Logic Gate Optocouplers For Ground Loop Elimination